Crown
Crown 33 #33
Nominal 1-9/16" · also 12 foot in cherry, hard maple, and paint-grade maple
Small crown for a tight soffit or a short wall cabinet.
Adding to Main run · Paint Grade Hard Maple Hybrid · Colourtone — Frosty White. Change the run or the finish
Mouldings
Standard mouldings
Solid wood, sold by the 8 foot stick. The length on the stick is about 94 to 97 inches. Profiles marked 12 foot are also available in cherry, hard maple, and paint-grade hard maple. The size shown is the nominal catalog size. Check the current drawing for the vertical drop and the projection before you close a ceiling.
Crown
Crown 6 #6
Nominal 2-9/16" · also 12 foot in cherry, hard maple, and paint-grade maple
Everyday small crown. A good fit over wall cabinets around 30 inches and under.
Crown
Crown 619 #619
Nominal 3-3/8" · also 12 foot in cherry, hard maple, and paint-grade maple
Mid-size crown for wall cabinets in the 30 to 42 inch range.
Crown
Crown 24 #24
Nominal 4-5/16" · also 12 foot in cherry, hard maple, and paint-grade maple
Larger traditional crown for tall walls.
Crown
Reverse Shaker Crown #1529
Nominal 3-5/8" · also 12 foot in cherry, hard maple, and paint-grade maple
Square shaker crown. The usual partner for a square-bead TW-10.
Crown
Shaker Crown #1126
Nominal 3-5/8"
Square shaker crown sold with a mounting plate. Plate species may be paint-grade hard maple unless you ask for a match.
Crown
Large Cove #1524
Nominal 3-13/16" · also 12 foot in cherry, hard maple, and paint-grade maple
A broad cove crown.
Crown
Large Cove #2618
Nominal 5-1/8"
The taller large-cove crown.
Crown
Crown 2324 #2324
Nominal 3-7/8"
Mid traditional crown.
Crown
Crown 801 #801
Nominal 3-9/16" · also 12 foot in cherry, hard maple, and paint-grade maple
Crown with a mounting plate, sometimes called crown with a heel.
Crown
Crown 1557 #1557
Nominal 3-13/16"
Standard traditional crown.
Crown
Crown 1238 #1238
Nominal 4-5/8" · also 12 foot in cherry, hard maple, and paint-grade maple
Larger traditional crown.
Crown
Crown 342 #342
Nominal 4-3/8" · also 12 foot in cherry, hard maple, and paint-grade maple
Built-up crown. Takes mounting plate 384 and a 3/4 inch rope, 7/8 inch dentil, or 1 inch egg and dart.
Crown
Crown 343 #343
Nominal 4-3/8" · also 12 foot in cherry, hard maple, and paint-grade maple
Built-up crown with the same accent pocket as 342.
Crown
Crown 344 #344
Nominal 4-3/8" · also 12 foot in cherry, hard maple, and paint-grade maple
Built-up crown with the same accent pocket as 342.
Crown
Crown B10 #B10
Nominal 4-15/16" · also 12 foot in cherry, hard maple, and paint-grade maple
Large crown that can take a 3/4 inch rope or 7/8 inch dentil.
Crown
Crown 1550 #1550
Nominal 5-3/8"
Large crown. Uses mounting plate 384.
Crown
Crown 2325 #2325
Nominal 5-1/2" · also 12 foot in cherry, hard maple, and paint-grade maple
One of the larger standard crowns.
Crown
Crown 2584 #2584
Nominal 5-5/8"
Tall standard crown for rooms with the ceiling height to spare.
Crown
Crown 1621 with rope #1621
Nominal with rope
Crown sold with a rope insert. Confirm the current drawing for height and projection.
Crown
Crown 1622 with egg and dart #1622
Nominal with egg & dart
Crown sold with an egg-and-dart insert.
Crown
Crown 1623 with dentil #1623
Nominal with dentil
Crown sold with a dentil insert.
Crown
Crown mounting plate #384
Nominal 1-3/4"
Plate for crowns that call for it, including 1550, 342, 343, and 344.
Crown
Crown mounting plate #470
Nominal 1-3/4"
Alternate mounting plate. Use it when the crown drawing names 470.
Light rail
Light rail #361
Nominal 1-1/4" · also 12 foot in cherry, hard maple, and paint-grade maple
Small light rail under a wall cabinet.
Light rail
Light rail #B11
Nominal 1-1/2" · also 12 foot in cherry, hard maple, and paint-grade maple
The common light rail. Hides a puck or a strip under the wall cabinet.
Light rail
Light rail #2380
Nominal 1-3/4"
Light rail with a matching-species mounting plate. Most edge profiles can be applied to the top and bottom.
Light rail
Variable light rail #2578
Nominal 1-1/2"–5-1/2"
Face height can run from 1-1/2 to 5-1/2 inches. Matching mounting plate. Write the height in the note.
Scribe
Scribe #2316
Nominal 5/8" wide
Narrow scribe for a small gap at a wall.
Scribe
Scribe #1809
Nominal 13/16" wide
Slightly wider than 2316.
Scribe
Scribe #14
Nominal 1-1/4" wide · also 12 foot in cherry, hard maple, and paint-grade maple
The usual scribe on a frameless job. Rip or scribe it to the wall.
Scribe
Wide scribe #2317
Nominal 4" wide
A wide scribe when the gap is more than a normal filler wants to be.
Base
Base #897
Nominal 3-1/2"
Shorter base moulding. Useful on a furniture-style toe or a tall cabinet plinth.
Base
Colonial base #10
Nominal 4-1/2" · also 12 foot in cherry, hard maple, and paint-grade maple
Colonial base at the same height as the standard toe.
Base
Beaded base #381
Nominal 4-1/2" · also 12 foot in cherry, hard maple, and paint-grade maple
Beaded base, 4-1/2 inches. Specify face side on a two-face profile.
Base
Base #898
Nominal 5-1/2"
Taller base moulding.
Base
Beaded panel #B09
Nominal 3-1/4"
Beaded panel moulding with two faces. Say face A or face B, and which side is finished.
Trim
Batten #13
Nominal 1-1/4"
Flat batten for a seam or a light decorative strip.
Trim
Quarter round #1329
Nominal 3/4"
Quarter round for inside corners and small finishes.
Trim
Shoe moulding #583
Nominal 3/4"
Shoe moulding at the floor.
Trim
Inside corner cove #11
Nominal 3/4"
Cove for an inside corner.
Trim
Outside corner #12
Nominal 3/4"
Outside corner moulding.
Trim
Shiplap #2580
Nominal 4-9/16", 5-9/16", 6-9/16"
Shiplap moulding in three widths. Write the width in the note. Solid wood, 8 foot.
Accent
Rope #Rope 3/4
Nominal 3/4"
Insert for crowns 342, 343, 344, and B10.
Accent
Dentil #Dentil 7/8
Nominal 7/8"
Insert for the same built-up crowns.
Accent
Egg and dart #Egg & dart 1
Nominal 1"
Insert for crowns 342, 343, and 344.
Accent
Rope #Rope 1-1/2
Nominal 1-1/2"
Larger rope for crowns that call for a 1-1/2 inch insert, including the 1620 series.
Accent
Dentil #Dentil 1-1/2
Nominal 1-1/2"
Larger dentil insert.
Accent
Egg and dart #Egg & dart 1-1/2
Nominal 1-1/2"
Larger egg-and-dart insert.