End panels · BEP
Base end panel
Finished panel on an exposed base end. 3/4 inch, in the job species, one good face.
- Standard piece is 34-1/2 inches high by 24 inches deep.
- Use a 3 inch or 6 inch return when only the front edge of the end shows.
Adding to Main run · Paint Grade Hard Maple Hybrid · Colourtone — Frosty White. Change the run or the finish
Optional parts
Ends, fillers, and toe kick.
End panels · WEP
Wall end panel
Finished panel on an exposed wall end. Depth matches a 12 inch wall unless you note otherwise.
- Order the height of the cabinet it covers.
- A deep wall (24 inch) needs a note.
End panels · TEP
Tall end panel
Finished panel on an exposed pantry, oven, or utility end.
- 24 inches deep to match the tall cabinet.
- Grain runs the height of the panel.
End panels · DWEP
Dishwasher end panel
Finished panel beside a dishwasher when that end is exposed.
- 34-1/2 inches high.
- Full 24 inch depth, or a narrow return if the dishwasher sits between two cabinets.
End panels · REP
Refrigerator end panel
Tall finished panel at the side of a refrigerator.
- Match the tall-cabinet height in that run.
- A 3 inch return is enough when the panel only has to die into the fridge side.
End panels · FBP
Finished back panel
A finished back for a peninsula or any cabinet seen from behind.
- Same material as an end panel.
- Write the real width and height in the note if it is not a standard end.
End panels · DEP
Door-style end
A TW-10 door used as a decorative end or wainscot panel, applied over the exposed side.
- Uses the same edge profile and framing bead as the job.
- TW-10 can be built as a wainscot panel. Note the finished size.